ASI is pleased to announce that we have received our ISO 9001:2015 certification.  This enhanced certification level means that our processes have been independently audited and were found to be in compliance with the newest standards set by the International Organization for Standardization.  Our team is committed to providing quality products and services by adhering to these standards.  ASI is certain this accomplishment will help us succeed in our future endeavors.

{ 0 comments }

The Simulator Maintenance Technician is responsible for operations, maintenance and upkeep of the T-1A Ground Based Training System.

Job Type: Full-time or part-time

Essential Functions and Responsibilities:

  • Provides ATD student and instructor support.
  • Performs scheduled and unscheduled maintenance of training devices/support equipment including, but not limited to: on- and off-equipment maintenance including troubleshooting and fault isolation, adjusting, removing, and replacing assemblies and components, and correcting discrepancies.
  • Performs scheduled and unscheduled maintenance on state-of-the-art equipment containing energized voltages in excess of 3,000 volts.
  • Assists Simulator Maintenance Technician III’s with collateral duties as may be assigned, including supply, inventory control and administrative procedures.
  • Prepares computerized maintenance action reports and other support documentation as may be assigned by the Company.
  • Kit-proofs/installs modification kits.
  • Supports SIMCERT activity.
  • Performs other duties as assigned.
  • Complies with established Company policies, procedures, and safety practices.
  • Travels as required.

Qualification Requirements:  To perform this job successfully, an individual must be able to perform each essential function satisfactorily.  The following requirements are representative of the necessary qualifications.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Experience: One to three years of experience in maintenance of aircrew training devices or equivalent. One year of experience as a computer workstation technician or equivalent, with a demonstrated ability to troubleshoot complex non-routine problems.

Education or Formal Training: High School diploma or equivalent required; An Associate’s Degree in an electronics field or completion of  Vo-Tech Simulator Maintenance Program, or a BSEE or BSME is desirable.

Knowledge, Skill, and Ability:

  • Working knowledge of Flight Simulator Maintenance and Supply procedures, electronic and mechanical theory, operating principles of digital and analog computers and management principles and their application to training devices.
  • Ability to read and accurately troubleshoot electronic components using system drawing and schematics.
  • Thorough working knowledge of instruments and devices associated with the avionics industry.
  • Thorough working knowledge of standard electronic test equipment
  • Ability to fluently read, write, speak, and understand English.
  • Ability to clearly relay information, both verbally and written, to others.
  • Ability to effectively present information and respond to questions from customers.
  • Ability to effectively use computers and standard office PC software.
  • Must successfully pass and maintain a National Agency Check (NAC) by the U.S. Government.
  • Must have or be able to obtain and maintain a security clearance.
  • Must be U.S. Citizen.

Working Environment/Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to talk or hear; to sit, stand, and walk; and use hands to finger, handle or feel objects or controls. The employee is occasionally required to reach with hands and arms and to stoop and kneel. The employee must be able to ingress/egress from the simulator (which may require repeated climbing, crawling and twisting movements on a regular basis), work in inclement weather and temperature extremes as set forth in Air Force and company guidelines. The employee must frequently lift and/or move up to 25 pounds. While performing essential functions the employee must have the ability to accurately read text on computer terminals, cable markings, trainer assemblies and other equipment or written materials. Employees also must be able to correctly perform trainer visual alignment procedures. The noise level ranges from low to moderate.

Note: This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the job.

{ 0 comments }

Simulator Maintenance Technician – Columbus AFB

October 27, 2017

The Simulator Maintenance Technician is responsible for operations, maintenance and upkeep of the T-1A Ground Based Training System. Job Type: Full-time or part-time Essential Functions and Responsibilities: Provides ATD student and instructor support. Performs scheduled and unscheduled maintenance of training devices/support equipment including, but not limited to: on- and off-equipment maintenance including troubleshooting and fault […]

Read the full article →

Simulator Maintenance Technician – Laughlin AFB

October 27, 2017

The Simulator Maintenance Technician is responsible for operations, maintenance and upkeep of the T-1A Ground Based Training System. Job Type: Full-time or part-time Essential Functions and Responsibilities: Provides ATD student and instructor support. Performs scheduled and unscheduled maintenance of training devices/support equipment including, but not limited to: on- and off-equipment maintenance including troubleshooting and fault […]

Read the full article →

Project Engineer

October 26, 2017

Job Description: Proposal technical responsibility from conceptual design to final delivery. Overall program technical design responsibility. Definition, management, coordination, and integration of all program efforts. Ensure technical design meets fidelity of specification requirements and customer needs. Works with the Program Manager (PM) to ensure program budget and schedule compliance. Conducts design reviews. Primary technical interface […]

Read the full article →

Technical Writer

September 29, 2017

Job Description:   Research, write, and edit project documentation deliverables (e.g. Technical Reference Manuals, Procedures, System Operation & Maintenance Manuals, Instructor Utilization Handbooks, and Training System Support Document) in accordance with Data Item Descriptions. Manage all aspects of assigned projects, including planning, researching, writing, review process, coordination of other departmental resources, and publication. Work closely with […]

Read the full article →

ASI Has Moved!!!

August 25, 2017

Tampa, Florida (June 2017) Aero Simulation, Inc. has moved into our new facility at 8720 E. Sligh Ave., Tampa, FL.  This 60,000 square foot facility was tailor built to our specifications and provides us over 22,000 square feet of high bay space, 1,800 square feet of meeting spaces, over 22,000 square feet of office space […]

Read the full article →

ASI wins NADTC 2.0 Contract from NAWC-TSD

July 24, 2017

Tampa, Florida (June 2017) – Aero Simulation Inc. (ASI) is pleased to announce its latest contract award, the Navy Aviation Distributed Training Center (NADTC) 2.0 Program, for delivery of a coordinated distributed training center that supports mission training exercises in support of Fleet Synthetic Training – Aviation (FST-A). Awarded by the Naval Air Warfare Center […]

Read the full article →

Ordering Information

February 27, 2017

Terms: Net 15 days or as quoted FOB: Origin Warranty: As quoted CAGE Code: 0HSA4 D&B: 15-286-9871 Freight: Prepay & add to invoice Validity: The above price and deliveries may change without notice due to availability of component parts. Placing an order: Contact Aero Simulation, Inc. at (813) 628-4447 or by fax at (813) 628-8404. Aero Simulation, Inc. certifies that prices shown […]

Read the full article →

Transport Delay Test Kit (ADS800300-01)

February 27, 2017

ASI has developed an intuitive and user friendly Transport Delay Test Kit that allows data collection from a simulator to measure the inherent time delays in processing a signal through the various computers and software packages.  The main use of the test kit will be to measure the transport delay (also called system dynamic response […]

Read the full article →